The cooling work of the generator is particularly important in summer, as the long-term operation of the machine not only generates its own heat but also absorbs heat from the surrounding air. If the cooling is not carried out in a timely manner, it is very likely to cause machine malfunction. Below is a summary of how to cool the generator due to high temperatures in summer, for your reference:
1、 Firstly, the temperature of the operating environment:
In order to ensure the normal operation of the generator set, it is necessary to provide a good ventilation environment, especially to ensure that the exhaust and smoke exhaust of the water tank are in good condition. At the same time, it is necessary to ensure the cleanliness of the machine room floor and good ventilation of the machine room. Furthermore, if it is used outdoors, the generator should be placed in a cool place as much as possible. If there are no conditions, a wooden board can be placed on the generator to prevent direct sunlight exposure. At the same time, attention should be paid to this, When building wooden boards, avoid covering the exhaust holes to ensure smooth exhaust.
2、 Maintain a clean cooling system and sufficient coolant:
Keeping the cooling system clean can effectively improve the efficiency of the generator set and provide a good operating environment for the generator set. We will take a radiator as an example to illustrate that if there is soil, oil stains, or deformation of the heat sink due to collision on the outside of the radiator, the heat dissipation effect of the generator set will be affected. If this situation is found during use, it should be cleaned or repaired in a timely manner.
When the generator set is in a dry and cold state, the coolant level should be between the high and low marks of the water tank, and should not be too high or too low, otherwise it will affect the cooling effect of the generator set.
3、 To avoid overloading the generator set:
If the generator is overloaded for a long time, it will cause the cooling effect of the coolant to deteriorate, causing the temperature of the generator set to be too high and affecting normal use.